Mt Ida Downstream Metallurgy Testwork Results
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
31 March 2026
Mt Ida Downstream Metallurgy Testwork
Highlights:
Flowsheet chemistry confirmed for Lithium Carbonate and Rubidium Carbonate
• Processing of Mt Ida mica concentrate successfully generated 99.8% Lithium Carbonate product
during testwork, confirming its suitability for battery manufacturing
• Low lithium losses during processing results in an overall lithium recovery of 86% to lithium
carbonate from concentrate.
• Development of a process to recover rubidium was also demonstrated and produced high-grade
Rubidium Carbonate (~97% Rb2CO3) from a combination of real and synthetic process solutions
• Recovery of rubidium from concentrate was 67% to a rubidium carbonate product
Corporate
• As of 27 March 2026, Delta’s cash balance was $52M and additional ASX-listed investments based
on closing prices on 27 March 2026 of circa $100M1
.
• Spodumene concentrate (SC6) prices stabilising above US$2,000 per tonne, providing significant
incentive to compile current study workflows for the Mt Ida Lithium Project
Delta Lithium Limited (ASX: DLI) (“Delta” or “the Company”) is pleased to provide an update on recent
downstream hydrometallurgical testwork on the lithium mica concentrate produced from the Whole-of-Ore
(WOO) flotation flowsheet at Delta’s 100% owned Mt Ida Lithium Project in WA’s Eastern Goldfields.
Comment from Managing Director, James Croser,
“The Company is excited to have achieved saleable and high purity lithium and rubidium carbonates from
the mica concentrate produced from Mt Ida’s whole-of-ore process flowsheet. This creates the real potential
for byproduct revenue from what is usually considered to be a waste stream, removed from the circuit prior
to the spodumene flotation stage.
The Company will pursue further testwork on the mica concentrate and seek inclusion of the additional
revenue to within the scope of financial modelling for the Mt Ida Lithium Project”.
1 Shares in listed investments include 156M BM1 (subject to escrow), 5M MEX (formerly UVA) and 16.1M JAV
2
ASX ANNOUNCEMENT
31 March 2026
Mt Ida is an advanced lithium, tantalum and rubidium project, with a current total JORC MRE of;
• 14.8Mt @ 1.2% Li2O, 170ppm Ta2O5 & 0.42% Rb2O
Including Measured & Indicated category of;
• 7.7Mt @ 1.33% Li2O, 212ppm Ta2O5 & 0.45% Rb2O
Figure 1: Location of Delta's Lithium Projects in Western Australia
3
ASX ANNOUNCEMENT
31 March 2026
Whole Of Ore Flotation Flowsheet
Previous work by the Company on the flowsheet design for onsite lithium concentration at Mt Ida2
has
indicated that a Whole of Ore flotation process is optimal for lithium recovery. An integral part of this
flowsheet is the removal of micas prior to the flotation of the spodumene, via a mica pre-float process, to
prevent the interaction of these micas during the subsequent spodumene concentration steps. This is a
metallurgically well-understood and proven methodology.
Figure 2: Mt Ida Whole of Ore concentrate flowsheet highlighting mica concentrate section
As reported previously, the mica pre-float process at Mt Ida produces a lithium mica concentrate,
predominantly lepidolite mineralisation, grading approximately 3% Li2O with a significant rubidium
concentration 1.8% Rb2O. This mica concentrate represents a compelling opportunity for byproduct revenue
due to the high-grade nature of the contained lithium and extremely high-grade rubidium. The rubidium at
Mt Ida exists in the lepidolite crystal matrix due to uncommon substitution of the alkali metal potassium with
the much rarer and heavier rubidium. Reserved concentrate from Delta’s previous metallurgical studies
were combined and used to generate representative material to reflect a life of mine (LOM) composite of
mica concentrate to be used in this downstream testwork.
This recent testwork on the mica concentrate has yielded successful production of battery grade lithium
carbonate and high purity rubidium carbonate. Delta’s Mt Ida Lithium MRE contains one of the highest grade
and largest publicly stated rubidium resources worldwide. Rubidium is included on the critical minerals lists
of the USA & Japan and, discussions with various stakeholders in their respective supply chains have been
instigated.
2
Refer ASX announcement 21 October 2025 “Mt Ida Project Lithium and Rubidium Update”
4
ASX ANNOUNCEMENT
31 March 2026
Hydrometallurgical Testwork
Mica Concentrate
The concentrate tested is primarily lithium containing micas such as lepidolite. The mica also contains
potassium, rubidium, caesium and gangue elements such as aluminium, iron, manganese and magnesium.
The concentrate also contains small quantities of other minerals such as quartz, albite and a small amount
of spodumene.
Figure 3 – Coarse fraction of mica concentrate sample
Hydrometallurgical Process
The process to recover lithium, rubidium and potassium involves mixing the concentrate with concentrated
sulfuric acid at an elevated temperature and atmospheric pressure to extract the metals into solution. The
subsequent mixture is filtered and washed to separate the residue as waste. Leach extraction for lithium
and rubidium from the mica concentrate is provided in Table 1.
Table 1 - Lithium and rubidium leach extraction
Element
Leach
extraction %
Lithium 91.9
Rubidium 86.2
5
ASX ANNOUNCEMENT
31 March 2026
Figure 4 - Leach slurry (left), Filtered leach solution (right)
The hot leach liquor, containing the valuable lithium, potassium and rubidium is cooled to selectively
crystallise potassium and rubidium alum salts – thus separating these elements from lithium.
The resulting lithium solution, which contains impurities, is purified by neutralisation with limestone and lime,
resulting in a gypsum (CaSO4.2H2O) rich residue waste that is filtered and removed. Lithium losses during
impurity removal averaged 650ppm Li, which corresponds to 4.1% lithium loss. The remaining process
solution, containing lithium and a small amount of sodium and potassium, proceeds to lithium precipitation.
Lithium is recovered from the solution by precipitation with sodium carbonate. The lithium carbonate solids
are filtered and washed, before being refined by re-dissolution and re-precipitation. The final solids
produced are a high purity lithium carbonate product.
Table 2 – Lithium crude and fine product purity
Li2CO3 product K (ppm) Na (ppm) Ca (ppm) S (ppm)
Li2CO3
purity (%)
Crude 200 200 2,900 2,470 96.8
Refined 2.5 4.8 477 71 99.8
6
ASX ANNOUNCEMENT
31 March 2026
Figure 5 - Crude Li2CO3 (left), re-dissolution (centre), refined Li2CO3 (right)
The alum salts produced from cooling the leach liquor are re-dissolved and the aluminium is removed by
precipitation with limestone and lime. Potassium sulfate is selectively crystallised from the solution, and
rubidium is recovered as a high-grade intermediate. The rubidium intermediate is re-dissolved and
aluminium is precipitated using lime and removed before the rubidium rich solution is further concentrated
by solvent extraction.
During the solvent extraction process, process liquor is refined to increase the ratio of rubidium to
potassium, which improves the purity of the final rubidium product. The aqueous solution is contacted with
an organic solvent to selectively recover the rubidium from solution. The solvent is then stripped with formic
acid to produce a concentrated rubidium formate solution.
Figure 6 - solvent extraction test - organic phase (top), aqueous phase (bottom)
Rubidium formate is crystallised from the concentrated loaded strip solution and is decomposed in a kiln to
produce rubidium carbonate. Development of the rubidium recovery process was conducted initially with Mt
Ida material and concluded using synthetic solutions to confirm the process conditions. A subsample of the
product was analysed via XRD mineralogy which confirmed the production of rubidium carbonate.
7
ASX ANNOUNCEMENT
31 March 2026
Table 3 - Rubidium carbonate product assays
Rubidium product Rb (%) K (%) Rb2CO3 (%) K2CO3 (%)
Assay 71.7 1.79 96.8 3.2
Figure 7 - rubidium formate crystallisation (left), rubidium carbonate (right)
The hydrometallurgical testwork demonstrated a viable process route to recover lithium and rubidium
carbonate products from Mt Ida mica concentrate. The process utilises recycled process streams to
minimise water consumption and valuable metal losses. As such, the process was modelled utilising
metallurgical modelling software (Metsim®
) to develop mass and energy balances for the process based on
real testwork results. The outcome of this modelling demonstrated that 86% of the lithium and 67% of the
rubidium can be recovered to separate carbonate products. This is a great first result and further
optimisation of the process is expected to improve recovery to final products.
Future metallurgy optimisation work includes:
• Optimisation of solvent extraction for improved rubidium-potassium separation.
• Continuous closed-circuit operation (piloting) to demonstrate process in steady state.
• Dewatering (thickening and filtration) testing on products and tailings streams
Release authorised by the Managing Director on behalf of the Board of Delta Lithium Limited.
For further information, please contact:
Delta Lithium Investor/Media Enquiries
James Croser, Managing Director Sodali & Co
Peter Gilford, CFO & Company Secretary Paul Ryan +61 409 296 511
+61 8 6109 0104
info@deltalithium.com.au
8
ASX ANNOUNCEMENT
31 March 2026
About Delta Lithium
Delta Lithium (ASX: DLI) is an exploration and development company focused on bringing high-quality, lithium-bearing pegmatite deposits, located
in Western Australia, into production. With current global JORC compliant resources of 36.5Mt@1.0% Li2O, strong balance sheet and an
experienced team driving the exploration and development workstreams, Delta Lithium is rapidly advancing its Projects.
The Mt Ida Project has coincident gold and lithium orebodies and holds a critical advantage over other developers with existing Mining Leases and
an approved Mining Proposal. Delta Lithium is pursuing a development pathway to unlock maximum value for shareholders. Delta has recently spun
out its gold assets into Ballard mining on 14th
July 2025 and retains a 34.4% equity stake in this company.
Delta Lithium also holds the highly prospective Yinnetharra Lithium Project, with exciting lithium discoveries at the Malinda and Jamesons prospects.
The Company is currently conducting exploration activities at Yinnetharra with fieldwork continuing in 2026 across our large tenure package, testing
additional targets and aiming to build on the current JORC Resources.
Competent Person's Statement
Information in this Announcement that relates to Metallurgical analysis of mica concentrate and downstream processing is based upon work
undertaken by Mr. Nick Vines, a Competent Person who is a Member of the Australasian Institute of Mines and Metallurgy (Aus IMM). Mr. Vines
has sufficient experience that is relevant to the style of mineralisation and type of deposit / concentrate under consideration and to the activity which
he is undertaking to qualify as a ‘Competent Person’ as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results,
Mineral Resources and Ore Reserves’ (JORC Code). Mr. Vines is an employee of Strategic Metallurgy and a consultant to Delta Lithium Ltd, Nick
consents to the inclusion in this announcement of the matters based on his information in the form and context in which it appears.
The information in this report which relates to Metallurgical Testwork of lithium ore for the Mt Ida Project was supervised by Ms Rain Lewis who is
an employee of Nagrom laboratories. Ms Lewis is a Member of the Australasian Institute of Mining and Metallurgy and has sufficient experience
relevant to the style of mineralisation, the type of deposit under consideration and to the activity undertaken to qualify as Competent Persons as
defined in the 2012 edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Ms Lewis consents
to the inclusion of the information in the release in the form and context in which it appears.
Refer to www.deltalithium.com.au for past ASX announcements.
Past Exploration results and Mineral Resource Estimates reported in this announcement have been previously prepared and disclosed by Delta
Lithium in accordance with JORC 2012. The Company confirms that it is not aware of any new information or data that materially affects the
information included in these market announcements. The Company confirms that the form and content in which the Competent Person's findings
are presented here have not been materially modified from the original market announcement, and all material assumptions and technical
parameters underpinning Mineral Resource Estimates in the relevant market announcement continue to apply and have not materially changed.
Refer to www.deltalithium.com.au for details on past exploration results and Mineral Resource Estimates.
Disclaimer
This release may include forward-looking and aspirational statements. These statements are based on Delta Lithium management’s expectations
and beliefs concerning future events as of the time of the release of this announcement. Forward-looking and aspirational statements are necessarily
subject to risks, uncertainties and other factors, some of which are outside the control of Delta Lithium, which could cause actual results to differ
materially from such statements. Delta Lithium makes no undertaking to subsequently update or revise the forward looking or aspirational statements
made in this release to reflect events or circumstances after the date of this release, except as required by applicable laws and the ASX Listing
Refer to www.deltalithium.com.au for past ASX announcements.
9
ASX ANNOUNCEMENT
31 March 2026
Appendix 1 - Lithium MRE Group summary table
Delta Lithium Group Mineral Resource estimate (Li₂O only)
Resource category
Cut-off
grade
(Li₂O%)
Li₂O Ta₂O₅ Rb2O
Tonnes
(Mt)
Grade
(% Li₂O)
Li₂O
(Kt)
Grade
(Ta₂O₅
ppm)
Grade
(Rb2O %)
Yinnetharra
Measured
0.5
- - - - -
Indicated 16.1 1.0 158 77 -
Inferred 5.8 0.9 54 69 -
Total Resource 21.9 1.0 212 75 -
Mt Ida
Measured
0.3 - 0.5
0.5 1.1 5.9 256 0.39
Indicated 7.2 1.3 96 215 0.45
Inferred 7.1 1.1 83 126 0.38
Total Resource 14.8 1.2 190 173 0.42
Total Measured 0.5 1.1 5.5 256 0.39
Total Indicated 23.3 1.1 254 120 0.45
Total Inferred 12.9 1.0 137 100 0.38
Total 36.7 1.1 402 115 0.42
10
ASX ANNOUNCEMENT
31 March 2026
Appendix 2 – Mt Ida Mineral Resource Estimate
Mt Ida Lithium, Tantalum & Rubidium Resource November 2025
Li2O Ta2O5 Rb2O
Area
Resource category Cut-off
grade
(Li2O%)
Tonnes
(t)
Grade
(Li2O%)
Tonnes
(Li2O)
Grade
(Ta2O5
ppm)
Grade
(Rb2O%)
Sparrow
OP
Measured
0.3
- - - - -
Indicated 170,000 0.95 1,600 287 0.42
Inferred - - - - -
Total Resource 170,000 0.95 1,600 287 0.42
UG
Measured
0.5
- - - - -
Indicated 1,100,000 1.05 11,000 176 0.43
Inferred 1,100,000 0.93 10,000 141 0.40
Total Resource 2,200,000 0.99 21,000 159 0.42
All
Measured - - - - -
Indicated 1,300,000 1.03 13,000 191 0.43
Inferred 1,100,000 0.93 10,000 141 0.40
Total Resource 2,400,000 0.99 31,000 168 0.42
Sister Sam
OP
Measured
0.3
270,000 1.30 3,500 268 0.44
Indicated 3,200,000 1.45 46,000 257 0.48
Inferred 82,000 1.07 880 176 0.39
Total Resource 3,500,000 1.43 51,000 256 0.47
UG
Measured
0.5
- - - - -
Indicated 2,000,000 1.38 27,000 166 0.45
Inferred 4,900,000 1.12 55,000 119 0.38
Total Resource 6,900,000 1.19 82,000 133 0.40
All
Measured 270,000 1.30 3,500 268 0.44
Indicated 5,200,000 1.42 73,000 222 0.47
Inferred 5,000,000 1.12 55,000 120 0.38
Total Resource 10,400,000 1.27 130,000 175 0.42
Timoni
OP
Measured
0.3
220,000 1.09 2,400 240 0.33
Indicated 290,000 1.18 3,400 216 0.41
Inferred 27,000 0.75 210 185 0.25
Total Resource 540,000 1.12 6,000 224 0.37
UG
Measured
0.5
- - - - -
Indicated 470,000 1.35 6,400 191 0.33
Inferred 1,000,000 0.99 10,000 137 0.38
Total Resource 1,500,000 1.11 16,000 154 0.37
All
Measured 220,000 1.09 2,400 240 0.33
Indicated 760,000 1.29 9,900 200 0.36
Inferred 1,000,000 0.98 10,000 138 0.38
Total Resource 2,000,000 1.11 22,000 173 0.37
Total Measured 490,000 1.20 5,900 256 0.39
Total Indicated 7,200,000 1.34 96,000 215 0.45
Total Inferred 7,100,000 1.07 76,000 126 0.38
Total 14,800,000 1.21 177,000 170 0.42
11
ASX ANNOUNCEMENT
31 March 2026
Appendix 3 – Mount Ida JORC Tables
JORC Table 1: Section 1: Sampling Techniques and Data
Criteria Explanation Commentary
Sampling
techniques
Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any measurement
tools or systems used. Aspects of the
determination of mineralisation that are
Material to the Public Report. In cases where
‘industry standard’ work has been done this
would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In
other cases more explanation may be
required, such as where there is coarse gold
that has inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine nodules) may warrant disclosure
of detailed information
• Gold & lithium sampling activities carried out by Delta
Lithium and now Ballard Mining at the Mt Ida Project have
included reverse circulation (RC)and diamond (DD)
drilling.
Metallurgical Sampling
• Metallurgical sampling from this announcement was
undertaken on representative core samples spread
across all geomet domains.
• They were selected by Delta geologists and cut by Delta
field staff using standard industry practices
• These samples were composited and intended to
represent a life of mine (LOM) mica concentrate product
from the Mt Ida flowsheet.
• This compositing and final selection occurred at Nagrom
laboratories
• All crushing, milling and flotation works was completed by
Nagrom Laboratories.
• Only core was used directly for the metallurgical work as
RC samples are not thought to be representative due
losses of fines during the drilling process.
• Dry mica concentrate was received for hydrometallurgical
testwork conducted at Strategic Metallurgy.
• The mica concentrate was received as <1mm material
and blended via multiple rotary mix and split methodology
to produce homogenous samples.
• RC samples are still referenced in section 1 as RC
samples and pulps have been used for mineralogical
studies to assist with this workflow.
Data collection from the field was completed using the
below methodologies
• RC samples were collected from a static cone splitter
mounted directly below the cyclone on the rig, DD
sampling was carried out to lithological/alteration domain
with lengths between 0.3-1.1m
• Limited historical data has been supplied, historic
sampling has been carried out by Hammill Resources,
International Goldfields, La Mancha Resources, Eastern
Goldfields and Ora Banda Mining, and has included RC,
DD and rotary air blast (RAB) drilling
• Sampling of historic RC has been carried out via riffle split
for 1m sampling, and scoop or spear sampling for 4m
composites, historic RAB drilling was sampled via spear
into 4m composites
• Historic core has been cut and sampled to geological
intervals
• These methods of sampling are considered to be
appropriate for this style of exploration
Drilling techniques Drill type (eg core, reverse circulation, open-
hole hammer, rotary air blast, auger, Bangka,
sonic, etc) and details (eg core diameter,
triple or standard tube, depth of diamond tails,
face-sampling bit or other type, whether core
is oriented and if so, by what method, etc).
• RC Drilling has been carried out by Orlando Drilling and
Frontline Drilling, PXD, RC drilling utilised an Explorac
220RC rig, T66 Schramm RC Rig with a 143 mm face
sampling hammer bit, DD drilling was completed by both
Frontline Drilling and DDH1, in both cases a truck
mounted Sandvik DE820 and a KWL 1500 were applied
and was mainly HQ2 and NQ2 diameter with minor PQ2.
• Diamond tails average 200-300m depth but went as deep
as >1,000m
• Historic drilling has been completed by various
companies including Kennedy Drilling, Wallis Drilling,
Ausdrill and unnamed contractors
• Historic DD drilling was NQ sized core
• It is assumed industry standard drilling methods and
equipment were utilised for all historic drilling
12
ASX ANNOUNCEMENT
31 March 2026
Criteria Explanation Commentary
Drill sample
recovery
Method of recording and assessing core and
chip sample recoveries and results assessed.
Measures taken to maximise sample recovery
and ensure representative nature of the
samples. Whether a relationship exists
between sample recovery and grade and
whether sample bias may have occurred due
to preferential loss/gain of fine/coarse
material.
• Sample condition is recorded for every RC drill metre
including noting the presence of water or minimal sample
return, inspections of rigs were carried out daily
• Recovery on diamond core is recorded by measuring the
core metre by metre
• Limited sample recovery and condition information has
been supplied or found for historic drilling
Logging Whether core and chip samples have been
geologically and geotechnically logged to a
level of detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies. Whether logging is
qualitative or quantitative in nature. Core (or
costean, channel, etc) photography. The total
length and percentage of the relevant
inersections logged.
• Quantitative and qualitative geological logging of
drillholes adheres to company policy and includes
lithology, mineralogy, alteration, veining and weathering
• Diamond core logging records lithology, mineralogy,
alteration, weathering, veining, RQD, SG and structural
data
• This information was used to select the appropriate core
for this metallurgical testwork
• All RC chip trays and drill core are photographed in full
• A complete quantitative and qualitative logging suite was
supplied for historic drilling including lithology, alteration,
mineralogy, veining and weathering
• It is unknown if all historic core was oriented, limited
geotechnical logging has been supplied
• No historic core or chip photography has been supplied
• Historic comments on logging are very useful in to verify
geological details between lithologies.
• Logging is of a level suitable to support Mineral resource
estimates and subsequent mining studies
13
ASX ANNOUNCEMENT
31 March 2026
Sub-sampling
techniques and
sample preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or
dry. For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
Quality control procedures adopted for all
sub-sampling stages to maximise
representivity of samples.
Measures taken to ensure that the sampling
is representative of the in situ material
collected, including for instance results for
field duplicate/second-half sampling. Whether
sample sizes are appropriate to the grain size
of the material being sampled.
• DD sampling is undertaken by lithological/alteration
domain to a maximum of 1.1m and a minimum of
0.3m. Core is cut in half with one half sent to the lab
and one half retained in the core tray
• Occasional wet RC samples were encountered,
extra cleaning of the splitter was carried out
afterward
• Should over 6 samples in a row be wet, the hole will
be abandoned if it is aimed to be used in a MRE,
with the intention of Diamond tailing it to retain
sample quality.
• Samples analysed by via fire assay at ALS, Nagrom,
NAL and SGS were dried, crushed and pulverised to
80% passing 75 microns before undergoing a
selected peroxide fusion digest or 4 acid digest with
ICPMS finish or fire assay with ICPMS finish
• The recent system in place has been to conduct
Photon assaying and then 4-acid digest to determine
Gold and other analytes, then all pegmatite interval
pulps are re-submitted for lithium analysis via
peroxide fusion.
• RC duplicate field samples were carried out at a rate
of 1:20 and were sampled directly from the splitter
on the rig. These were submitted for the same assay
process as the primary samples and the laboratory
are unaware of such submissions
• Historic chip sampling methods include single metre
riffle split and 4m composites that were either scoop
or spear sampled, while historic core was cut onsite
and half core sampled
• Historic samples were analysed at LLAS, Genalysis
and unspecified laboratories
Metallurgical component
• The following metallurgical testwork has been
undertaken previously and provided the material to
feed into the downstream processing referred to in
this announcement;
- Comminution testing
- Magnetic Separation via LIMS & WHIMS
- Desliming conducted in via both wet screening and
cyclone desliming.
- Mica preflotation using a range of reagents and
operating conditions
- Spodumene flotation using a range of reagents and
operating conditions
- Dynamic thickener testing using dynamic thickener rig
and vacuum filtration testing using a buchner test unit
- Bulk materials characterisation testing
• Mineralogy data has been collected using TIMA and
FTIR which assisted in the geometallurgical
domaining process
Downstream Processing Component
• The following metallurgical testwork has been
undertaken on mica concentrate and subsequent
process liquors:
o Leaching
o Precipitation
o Crystallisation
o Solvent extraction
• Kinetic sub samples are obtained by extraction of
100mL sub samples, via syringe from agitated
vessels. Sub samples are diluted in-situ with entire
samples submitted for assay.
• All solid samples are thoroughly washed with water
and dried
• Final samples are homogenised and riffled to
provide a representative sub sample.
• Assay sub samples are reconciled to head assays to
confirm accuracy of results
14
ASX ANNOUNCEMENT
31 March 2026
Criteria Explanation Commentary
Quality of assay
data and laboratory
tests
The nature, quality and appropriateness of
the assaying and laboratory procedures used
and whether the technique is considered
partial or total. Nature of quality control
procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and
whether acceptable levels of accuracy (ie lack
of bias) and precision have been established.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the analysis
including instrument make and model,
reading times, calibrations factors applied and
their derivation, etc.
• Samples have been analysed by external laboratories
utilising industry standard methods
• The assay methods utilised by ALS, Nagrom, NAL and
SGS for RC chip and core sampling allow for total
dissolution of the sample where required
• Standards and blanks are inserted at a rate of 1 in 20 in
RC and DD sampling, All QAQC analyses were within
tolerance
• QAQC reviews are completed on a monthly basis with
any fails being investigated thoroughly in conjunction with
the lab.
• All historic samples are assumed to have been prepared
and assayed by industry standard techniques and
methods
• Limited historic QAQC data has been supplied, industry
standard best practice is assumed
Metallurgical Sample assaying:
• Metallurgical samples were analysed at Nagrom
Laboratory, Kelmscott, Western Australia.
• Li, Rb, U and Th were measured by ICP which is
considered industry standard for lithium analysis. All other
analytes were measured by XRF.
• ICP samples were prepared by sodium peroxide fusion
and acid digestion. QA/QC controls included periodic
blanks, and duplicates; and inclusion of lithium standards
with every submission.
• XRF samples were prepared by fusion with lithium borate
flux and lithium nitrate additive to form a bead which was
analysed by XRF.
Downstream Processing Asssaying
• The following metallurgical testwork has been undertaken
on mica concentrate and subsequent process liquors:
• Leaching
• Precipitation
• Crystallisation
• Solvent extraction
• Kinetic sub samples are obtained by extraction of 100mL
sub samples, via syringe from agitated vessels. Sub
samples are diluted in-situ with entire samples submitted
for assay.
• All solid samples are thoroughly washed with water and
dried
• Final samples are homogenised and riffled to provide a
representative sub sample.
• Assay sub samples are reconciled to head assays to
confirm accuracy of results
Verification of
sampling and
assaying
The verification of significant intersections by
either independent or alternative company
personnel. The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols. Discuss
any adjustment to assay data
• Significant intercepts are always reviewed by senior
personnel
• Primary data is collected via excel templates and third-
party logging software with inbuilt validation functions, the
data is forwarded to the Database administrator for entry
into a secure SQL database. Historic data was supplied in
various formats and has been validated as much as
practicable
• No adjustments to assay data have been made
• Data entry, verification and storage protocols remain
unknown for historic operators
15
ASX ANNOUNCEMENT
31 March 2026
Criteria Explanation Commentary
Location of data
points
Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and other
locations used in Mineral Resource
estimation. Specification of the grid system
used. Quality and adequacy
Share your feedback
Discover